Night vision camera calibration for Seattle and Tacoma Body Shops
Night vision calibration realigns the thermal/IR camera that drives pedestrian and animal detection at night. The OEM requires it after grille, hood, windshield or radiator-support work on equipped vehicles. Focal ADAS performs it on-site in 30 to 90 minutes and delivers a pre-scan, post-scan, OEM procedure reference and IR target verification record with the invoice.
Last updated: May 2026
Night vision calibration realigns the thermal/IR camera that drives pedestrian and animal detection at night. The OEM requires it after grille, hood, windshield or radiator-support work on equipped vehicles. Focal ADAS performs it on-site in 30 to 90 minutes and delivers a pre-scan, post-scan, OEM procedure reference and IR target verification record with the invoice.
When this calibration is required
Triggers below come from the manufacturer's published procedure for the build. Any one of them is enough to put the line on the file.
- Grille, hood or radiator-support repair on a night-vision-equipped vehicle
- Windshield replacement (some builds mount the IR camera to the glass)
- IR camera replaced or unplugged
- Stored DTC on the night vision or thermal camera module
- Customer complaint of missing pedestrian highlighting at night
How Focal ADAS performs it
- 1Pre-scan and VIN decode
We pull every stored DTC and decode the VIN to load the exact OEM calibration procedure for that build.
- 2Target setup or drive prep
Targets are placed at OEM-specified distances and angles in your bay, or the dynamic drive route is staged.
- 3Calibration procedure
Static, dynamic, or both — performed in the order the manufacturer requires, with the scan tool driving the sequence.
- 4Post-scan and verification
A clean post-scan confirms the calibration completed and no new faults were set during the procedure.
- 5Documentation handed off
Pre-scan, post-scan, completion record, OEM procedure reference, and setup photos delivered with the invoice.
What the shop gets
- Pre-repair scan report (all modules)
- Post-repair scan report (all modules)
- OEM calibration procedure reference (build-specific)
- Calibration completion record from the scan tool
- Setup photos of targets / drive evidence
- Itemized invoice — pass-through ready
Single-system calibrations start at $349, multi-system jobs quoted by VIN.
Frequently asked questions
Is this the same as a forward camera calibration?+
No. The forward camera is visible-light through the windshield. The night vision camera is thermal IR, usually mounted in the upper grille, and uses its own target and procedure.
Do many vehicles even have this?+
Mostly luxury and high-trim full-size builds — recent BMW 7-series, S-Class, Cadillac Escalade, Rolls-Royce, Audi A8. Easy to miss on an estimate, expensive to leave un-calibrated.
How do you verify a thermal calibration?+
We use a heated target at OEM-specified distance and confirm the system highlights it at the correct bearing and range, then capture the completion record from the scan tool.
Same-day on-site calibration across the greater Puget Sound. Learn more about us or reach out directly.
Need a night vision calibration?
Reply with arrival window within the hour.