Forward camera calibration for Seattle and Tacoma Body Shops
The forward-facing camera mounted to the windshield powers lane keeping and automatic emergency braking, and it must be recalibrated whenever the windshield is replaced or the camera is disturbed. Focal ADAS performs this calibration on-site, usually in 30 to 90 minutes, and includes pre-scan, post-scan, OEM procedure reference, and setup photos.
Last updated: May 2026
The forward-facing camera mounted to the windshield powers lane keeping and automatic emergency braking, and it must be recalibrated whenever the windshield is replaced or the camera is disturbed. Focal ADAS performs this calibration on-site, usually in 30 to 90 minutes, and includes pre-scan, post-scan, OEM procedure reference, and setup photos.
When this calibration is required
Triggers below come from the manufacturer's published procedure for the build. Any one of them is enough to put the line on the file.
- After a windshield replacement on any vehicle with a windshield-mounted camera
- After front-end collision damage affecting the camera or its mount
- After the camera or mirror assembly is removed or replaced
- When the OEM procedure for the VIN calls for it, which Focal ADAS checks on every job
How Focal ADAS performs it
- 1Pre-scan and VIN decode
Pre-scan the vehicle and decode the VIN to confirm the required procedure.
- 2Target setup
Position manufacturer targets at the exact specified distances and set a level, controlled environment.
- 3Static, dynamic, or both
Run the static or dynamic calibration the manufacturer requires, or both.
- 4Post-scan and documentation
Post-scan to confirm the camera is calibrated and no new faults remain, and document with photos.
![[Upload real forward camera calibration photo]](/placeholder.svg)
What the shop gets
- Pre-scan and post-scan reports
- OEM procedure reference for the VIN
- On-site setup photos
- Calibration confirmation record
- One itemized invoice formatted for CCC, Mitchell, and Audatex
Single-system calibrations start at $349, multi-system jobs quoted by VIN.
Frequently asked questions
How long does forward camera calibration take?+
Most take 30 to 90 minutes on-site, depending on the vehicle and whether the procedure is static, dynamic, or both. The vehicle stays on the shop's floor the entire time.
Is calibration really required after every windshield replacement?+
On vehicles with a windshield-mounted forward camera, yes. Even a fraction of a degree of misalignment can cause the system to misread the road, so nearly every manufacturer requires recalibration after the glass is replaced.
Does the calibration come with documentation for insurance?+
Yes. Every calibration includes pre-scan, post-scan, the OEM procedure reference, and setup photos, formatted so the carrier approves and pays the line item.
Same-day on-site calibration across the greater Puget Sound. Learn more about us or reach out directly.
Need a forward camera calibration?
Reply with arrival window within the hour.